Título : |
Identifiability of control-oriented glucose-insulin linear models: review and analysis |
Tipo de documento : |
documento electrónico |
Autores : |
Carlos Esteban Builes Montaño, |
Fecha de publicación : |
2021 |
Títulos uniformes : |
IEEE Access
|
Idioma : |
Inglés (eng) |
Palabras clave : |
Glucose dynamics Identifiability Practical Indentifiability Biomedical systems Model identification |
Resumen : |
One of the main challenges of glucose control in patients with type 1 diabetes is identifying a control-oriented model that reliably predicts the behavior of glycemia. Here, a review is provided emphasizing the structural identifiability and observability properties, which surprisingly reveals that few of them are globally identifiable and observable at the same time. Thus, a general proposal was developed to encompass four linear models according to suitable assumptions and transformations. After the corresponding structural properties analysis, two minimal model structures are generated, which are globally identifiable and observable. Then, the practical identifiability is analyzed for this application showing that the standard collected data in many cases do not have the necessary quality to ensure a unique solution in the identification process even when a considerable amount of data is collected. The two minimal control-oriented models were identified using a standard identification procedure using data from 30 virtual patients of the UVA/Padova simulator and 77 diabetes care data from adult patients of a diabetes center. The identification was performed in two stages: calibration and validation. In the first stage, the average length was taken as two days (dictated by the practical identifiability). For both structures, the mean absolute error was 16.8 mg/dl and 9.9 mg/dl for virtual patients and 21.6 mg/dl and 21.5 mg/dl for real patients. For the second stage, a one-day validation window was considered long enough for future artificial pancreas applications. The mean absolute error was 23.9 mg/dl and 12.3 mg/dl for virtual patients and 39.2 mg/dl and 36.6 mg/dl for virtual and real patients. These results confirm that linear models can be used as prediction models in model-based control strategies as predictive control. |
Mención de responsabilidad : |
J. D. Hoyos, M. F. Villa-Tamayo, C. E. Builes-Montano, A. Ramirez-Rincon, J. L. Godoy, J. Garcia-Tirado, P. S. Rivadeneira |
DOI (Digital Object Identifier) : |
10.1109/ACCESS.2021.3076405 |
Derechos de uso : |
CC BY |
En línea : |
https://ieeexplore.ieee.org/document/9417219 |
Enlace permanente : |
https://hospitalpablotobon.cloudbiteca.com/pmb/opac_css/index.php?lvl=notice_display&id=5817 |
Identifiability of control-oriented glucose-insulin linear models: review and analysis [documento electrónico] / Carlos Esteban Builes Montaño, . - 2021. Obra : IEEE AccessIdioma : Inglés ( eng) Palabras clave : |
Glucose dynamics Identifiability Practical Indentifiability Biomedical systems Model identification |
Resumen : |
One of the main challenges of glucose control in patients with type 1 diabetes is identifying a control-oriented model that reliably predicts the behavior of glycemia. Here, a review is provided emphasizing the structural identifiability and observability properties, which surprisingly reveals that few of them are globally identifiable and observable at the same time. Thus, a general proposal was developed to encompass four linear models according to suitable assumptions and transformations. After the corresponding structural properties analysis, two minimal model structures are generated, which are globally identifiable and observable. Then, the practical identifiability is analyzed for this application showing that the standard collected data in many cases do not have the necessary quality to ensure a unique solution in the identification process even when a considerable amount of data is collected. The two minimal control-oriented models were identified using a standard identification procedure using data from 30 virtual patients of the UVA/Padova simulator and 77 diabetes care data from adult patients of a diabetes center. The identification was performed in two stages: calibration and validation. In the first stage, the average length was taken as two days (dictated by the practical identifiability). For both structures, the mean absolute error was 16.8 mg/dl and 9.9 mg/dl for virtual patients and 21.6 mg/dl and 21.5 mg/dl for real patients. For the second stage, a one-day validation window was considered long enough for future artificial pancreas applications. The mean absolute error was 23.9 mg/dl and 12.3 mg/dl for virtual patients and 39.2 mg/dl and 36.6 mg/dl for virtual and real patients. These results confirm that linear models can be used as prediction models in model-based control strategies as predictive control. |
Mención de responsabilidad : |
J. D. Hoyos, M. F. Villa-Tamayo, C. E. Builes-Montano, A. Ramirez-Rincon, J. L. Godoy, J. Garcia-Tirado, P. S. Rivadeneira |
DOI (Digital Object Identifier) : |
10.1109/ACCESS.2021.3076405 |
Derechos de uso : |
CC BY |
En línea : |
https://ieeexplore.ieee.org/document/9417219 |
Enlace permanente : |
https://hospitalpablotobon.cloudbiteca.com/pmb/opac_css/index.php?lvl=notice_display&id=5817 |
| |